LED Pool & Fountain Lights

LED Pool & Fountain Lights require specialized electrical, structural, and ingress protection parameters to withstand continuous submersion, high water pressure, and chemical exposure (such as chlorine, salt, or mineral water).

Core Technical Specifications

1. Waterproofing & Physical Seals

• Ingress Protection Rating: IP68 mandatory (continuous submersion under water at depths greater than 1 meter).
• Internal Protection: Epoxy resin-filled LED engine (prevents water ingress if the outer lens seal is compromised).
• Lens & Cover: High-transmission toughened glass (5mm–8mm thick) or UV-stabilized polycarbonate.
• Gaskets & Cable Glands: Silicone/EPDM rubber seals with IP68 PG9/PG11 stainless steel cable glands.

2. Electrical & Safety Parameters

• Operating Voltage: 12V AC/DC or 24V DC (Safety Extra Low Voltage – SELV to eliminate electrical shock hazards).
• Power Ratings:
• Pond Spotlights / Fountain Jets: 3W – 18W
• Standard Pool Fixtures: 18W – 45W
• Luminous Efficacy: 80 to 110 Lumens per Watt (LM/W).

3. Housing Materials & Chemical Resistance

• 316 Stainless Steel (SS316 / SS316L): Recommended for marine environments, saltwater pools, and high-chemical applications due to its high resistance to pitting corrosion.
• 304 Stainless Steel (SS304): Standard material for freshwater ponds and fountains.
• ABS + Polycarbonate Plastic: Non-corrosive, durable option common in niche-mounted residential swimming pool lights.

4. Optical & Color Options

• Beam Angles:
• Narrow (10° – 30°): Deep pool illumination, fountain vertical water column jets.
• Wide (60° – 120°): Broad, uniform wall washing across pool surfaces.

Color Temperature / Modes:

• Single Color: Warm White (2700K–3000K), Cool White (6000K–6500K), Blue.
• Multi-Color: RGB / RGBW (Red, Green, Blue, White).

• Control Protocols: On/Off cycling, RF/IR Remote, Wi-Fi App, or DMX512 / RDM (used for dynamic, music-synchronized fountain light choreography).